| Hi lift mount on the cheap | |
|
|
Author | Message |
---|
cnckart
Posts : 462 Join date : 2010-01-11 Age : 45 Location : Taylorsville
| Subject: Hi lift mount on the cheap Mon Aug 23, 2010 4:46 pm | |
| Found some relatively cheap shaft clamps on Mcmastercarr. They were about $10 a piece. I did have to drill and tap for the stud, but when you work in a machine shop that's not a problem. IMG_0120 by cnckart, on Flickr I am using an eye nut to run a cable lock through. The hi lift won't be mounted permanantly, so this should work well to keep it in place in parking lots in Moab and such. IMG_0121 by cnckart, on Flickr IMG_0125 by cnckart, on Flickr So for a $20 investment and a little bit of time I'm happy about this.Now I just need to do the electrical tape trick on the jack to silence those rattles. | |
|
| |
gericurl Admin
Posts : 587 Join date : 2010-01-05 Age : 45 Location : Wellsville (Cache Valley)
| Subject: Re: Hi lift mount on the cheap Mon Aug 23, 2010 11:28 pm | |
| We need to have an electrical tape night. I took mine off when I was servicing my jack and forgot to add it again. Between the squeaking shocks and jack rattle I sound like I'm in a Heep (lol)
Looks nice Brad, better than my chain-link fence parts. | |
|
| |
cnckart
Posts : 462 Join date : 2010-01-11 Age : 45 Location : Taylorsville
| Subject: Re: Hi lift mount on the cheap Mon Aug 23, 2010 11:43 pm | |
| Thanks Brett! Nothing wrong with yours it works fine. We do need to do a wrench/tape night. I still have that skid for you, and we should do something about your squeaks, Your going to give the FJ a bad name! | |
|
| |
gericurl Admin
Posts : 587 Join date : 2010-01-05 Age : 45 Location : Wellsville (Cache Valley)
| Subject: Re: Hi lift mount on the cheap Tue Aug 24, 2010 10:22 pm | |
| I contacted Kurt from here (cruiser outfitters) and we're going to set up a time to look at those babies next time I can get down to Sandy at Cruiser Outfitters. He said there are a couple of things that might cause rubbing, but none of them are common. I'm praying I haven't bent anything down there, I don't feel like I'm THAT hard on my truck.
p.s. I haven't tried it or anything but anybody looking to do this mod should probably not google "shaft clamps" just go to McMaster Carr directly. lol | |
|
| |
Big-Ern
Posts : 352 Join date : 2010-03-02 Age : 58 Location : Clinton
| |
| |
BlackIceBob Moderator
Posts : 240 Join date : 2010-01-06 Age : 47 Location : Weber County
| Subject: Re: Hi lift mount on the cheap Thu Aug 26, 2010 1:36 pm | |
| I'm doing the rattle, too. Brad has a fix.... I just need to figure out a good time to fix it. Let's get a wrench night scheduled! | |
|
| |
cnckart
Posts : 462 Join date : 2010-01-11 Age : 45 Location : Taylorsville
| Subject: Re: Hi lift mount on the cheap Thu Aug 26, 2010 1:44 pm | |
| I'm totally down for a wrench night. I still need to do my scuba mod. | |
|
| |
SKIBUMM Admin
Posts : 237 Join date : 2010-02-26 Age : 59 Location : South Jordan
| Subject: Re: Hi lift mount on the cheap Fri Sep 03, 2010 11:27 am | |
| Brad I like this a lot. Can you tell me where you got those is that off the Internet? | |
|
| |
cnckart
Posts : 462 Join date : 2010-01-11 Age : 45 Location : Taylorsville
| Subject: Re: Hi lift mount on the cheap Fri Sep 03, 2010 11:46 am | |
| | |
|
| |
BlackIceBob Moderator
Posts : 240 Join date : 2010-01-06 Age : 47 Location : Weber County
| Subject: Re: Hi lift mount on the cheap Fri Sep 03, 2010 2:29 pm | |
| Nice blue Ford in the garage there, Brad! | |
|
| |
cnckart
Posts : 462 Join date : 2010-01-11 Age : 45 Location : Taylorsville
| |
| |
Sponsored content
| Subject: Re: Hi lift mount on the cheap | |
| |
|
| |
| Hi lift mount on the cheap | |
|